Unitec EZ Trak - Manual (Page 19)

E Z T R A K
Document Number: EZT1001 15
4.3 Setup/Change Accounts
Figure 9. Setup/Change Account Screen
The Setup/Change Account function allows you to add, change and delete accounts
from the EZ Trak system. To add or change an account:
1. Click and select the number of accounts you wish to add under the Add
Accounts drop-down menu. Accounts are added below that row, allowing you
to arrange accounts in any order.
2. Enter an Account Name (max 20 characters).
3. Enter the Department Name (max 10 characters). If you want several
accounts to be rolled up in the Account Report, the Department names must
be identical. This includes upper/lower case and spaces
4. Enter the number of washes allowed to the account (up to 9999).
5. Enter the 8-digit code on the front of the account card, if required.
6. Enter the 5-digit keypad code.
7. Select one of the following options from the Key/Card Status drop-down
menu: Disable, Keypad Only, Card Only, Either, Both Required.
8. Click the Submit button to save your changes or click the Reset button to
discard your changes.
Document Title: EZ Trak Installation and Operations Manual