Valco Baby Latitude Graco/Britax Car Seat Adaptor - Manual (Page 3)

E
F
H
G
Pull up to tighten
Secure on stroller
Insert Car Seat
Secure seat over front bar
Loop buckles through car seat
belt hooks, and secure buckle.
FIGURE E
6. Once strap is through the metal loop, pull plastic end up
to tighten, and secure on stroller.
7. Repeat process outlined in Figures B to E on other side
bar of stroller, with the other strap.
FIGURE F
8. Place car seat in seat portion of the stroller.
TIP: BE sURE THAT sEAT Is FULLy RECLINED.
FIGURE G
9. Be sure your car seat is securely fitted over the front
bumper bar, and in the stroller seat.
TIP: yOU MAy WANT TO ADJUsT THE FRONT BUMPER BAR
FOR MOsT sECURE FIT.
FIGURE H
10. Locate a Male/Female strap attached to side of stroller.
11. slip strap through the car seat belt hooks on the side of
the car seat.
12. Repeat with the other strap.
13. Insert Male clip into its Female counterpart and buckle.
14. Adjust straps to tighten around car seat.