Walker's Game Ear Hybrid EX User Manual

Walker’s digital hybrid ex, Owner’s manual, Selecting the right size tube

Advertising
background image

OWNER’S MANUAL

Walker’s Digital Hybrid EX

Foam Tips

#312 Battery

(4 Included)

Medium – 2B

(2 Included)

Case

Tulip Tip

Unit

Small – 1B

(2 Included)

Large – 3B

(2 Included)

Selecting the Right Size Tube

The Hybrid EX includes 3 different size tubes: Small, Medium and Large. Place the

Hybrid EX over your ear, with the medium tube attached. If the tube is too short,

the Hybrid EX’s back end will be up and the front end will be down. In this case, see

Step 4 to change to the large, 3B tube. If the tube is too long, the Hybrid EX’s back

end will be too low and the front end will be too high. In this case, see Step 4 to

change to the small 1B tube. Right tubes are labeled in red print, left tubes in blue.

Too Short

Correct

Too Long

Battery Insertion

The Hybrid EX uses a standard size #312 battery.

• To insert, remove adhesive sticker. Any moisture on the battery surface should be

wiped off prior to insertion. Open the battery door and insert the battery.

• To remove the battery, open the battery door and lift the battery out of the battery door.
Low Battery Indicator: When your battery is low you will hear five beeps indicating

that it is time to change your battery.
Helpful Hint: It is recommended that you leave your battery door open when not

using your instruments. This will prolong the life of your batteries.
Caution: Keep batteries out of reach of children or anyone who may accidentally

swallow them. Never put batteries in your mouth for any reason. Do not store batteries

in medication containers or where they may possible by mistaken for medication and

accidentally swallowed. Never attempt to recharge non-rechargeable batteries.

Changing Tubes

Tube Removal

Grasp the connector firmly.

Rotate the Hybrid 90°.

Pull straight out.

Note: It is important NOT to pull the tubing itself, as it can become stretched and distorted.

Tube Attachment

To attach, align the

tube assembly as

shown (tube facing

down)

Apply gentle pressure until

the tube snaps into place.

Note:

You will feel a firm

de-dent as it locks into

place

.

Tip Attachment

Choosing the Right Tip

Attention: In loud environments where hearing protection is necessary, use the foam

plug. An additional foam plug is included for the other ear. For environments that do

not have loud sounds, you can use either the foam tip or the tulip tip.

Gently grasp the foam tip with plastic insert and

slide onto tube as shown.

Gently grasp the tulip tip and slide onto

tube as shown.

Foam Tip

Tulip Tip

Foam

Tulip

No Tip

How To Wear The Hybrid EX

With Foam Plug: Squeeze and roll the foam plug between your fingers. Insert into ear

canal. The foam plug will gradually expand after insertion. Slide the Hybrid EX over your

ear. Make sure the foam tip does not loosen. Tuck the retention line in the bowl of your

ear and adjust/bend it until comfortable and secure.
With Tulip Tip: Grasp the Hybrid EX between your thumb and forefinger. Place it over

your ear as shown. Gently push the tulip into the ear canal. Tuck the retention line into

the bowl of your ear and adjust/bend it until comfortable and secure.

On/Off and Volume Adjustment

On & Off: The Hybrid EX is turned on and off by opening the battery compartment.
Volume Adjustment: Adjust the volume level of the Hybrid EX by rotating the volume

control. When adjusting the volume control, you will hear a single beep when the

volume level is at mid-point.

• 8 Channel Digital Circuitry

• 16 Band Graphic Equalizer

• 4 Programs

• Open/Closed Fit

Battery

Compartment

Volume

Control

Program Button

Advertising