Waring FP25C - Manual (Page 4)

6
THE PARTS
The Waring ® FP25 and FP25C food processors are compact, easy-to-use appliances. Completely assem-
bled, the FP25 is only 19" high (48.9cm) and stores conveniently when not in use. For more compact stor-
age, the cover can be stored upside down with the feed tube in the bowl. When stored this way, the unit is
only 14 3 ⁄
4
" high (37.5 cm).
The Waring FP25 and FP25C food processors both consist of the following standard parts and
accessories:
1. Solid Polycarbonate Motor Base with vertical stainless steel shaft
2. Two Control Levers
a. ON
b. PULSE / OFF
3. Safety Interlock Tower
Prevents machine from operating until cover is in place
4. Clear Work Bowl with 6 3 ⁄
4
-inch diameter (17.1 cm)
Dry capacity of 2.5 quarts
Wet capacity of 1.5 quarts
5. Clear Work Bowl Cover
a. Large oval-shaped Feed Tube for maximum use of cutting surface
3 ⁄
8
inches (.953cm) x 2 3 ⁄
4
inches (7.0 cm) wide
b. Large Pusher with full-size and reduced-size feed options
c. Small Pusher used within the large pusher for smaller vegetables, pepperoni, etc.
Note: This combination pusher allows use of the entire feed tube for large foods and
provides controlled processing for small-diameter foods such as carrots, celery and
pepperoni.
6. Sharp and durable S-Blade (Cutter Blade) to chop, grind, purée, mix and knead
7. 4 mm,
5 ⁄
32
" Slicing Disc
8. 5 mm, 3 ⁄
16
" Shredding Disc
9. 6.5 mm x 6.5 mm, 1 ⁄
4
" x 1 ⁄
4
" Julienne Disc
10. Safety Reset Switch
Note that all of the FP25 and FP25C accessory discs have a unique offset stem. The design
of this stem increases the cutting / processing efficiency of these accessories. The stems can
be easily removed for cleaning in accordance with NSF guidelines.
The FP25C comes with these additional components:
11. Continuous Feed Chute
12. Clear Cover for Feed Chute
13. Slinger
BATCH
BOWL
CONTINUOUS
FEED
5a
5a
6
2b
FP25 is batch bowl model
2a
13
FP25C is combination model with
batch bowl and continuous-feed parts
7
5b
5b
5c
5c
12
2b 2a
3
11
3
1 1
5
4
7
8
9
10