Special cord set instructions, Operation – Waring WCT850 User Manual

Page 5

Advertising
background image

Special Cord Set Instructions

A short power-supply cord is provided to reduce the risks result from

becoming entangled in or tripping over a longer cord.
Longer extension cords may be used if care is exercised in their use.
If a long extension cord is used, the marked electrical rating of the

extension cord must be at least as great as the electrical rating of the

appliance, and the longer cord should be arranged so that it will not

drape over the countertop or table top where it can be pulled on by

children or tripped over. If the appliance is of the grounded type, the

extension cord should be a grounding type

3-wire cord

Operation

1. Put toaster on counter or flat, dry surface near electrical outlet.
2. Place bread in all the slots, set both browning controls and

push down the carriage control levers. The toasted bread will

automatically rise when the bread cycle is complete.

3. The regular slots toast both sides of bread, while bagel slots

toast only on one side.

4. To stop toasting mid-cycle, just lift up the carriage control lever.
5. WCT810/WCT815/WCT815B:
The sliced side of bagels and buns needs to face to the left.

Arrows on toaster indicate toasting side.

WCT820/WCT825/WCT825B:
The sliced side of bagels and buns should follow the diagram

on the top panel of the toaster.

WCT850: To toast both sides of bread, switch must be

positioned on the bread selection. To toast only one side, switch

must be positioned on the bagel selection. The sliced side of

bagels and buns should follow the diagram on the top panel

of the toaster.

CAUTION: The removable crumb tray must be completely inserted

before toaster can be operated. If the tray is removed for cleaning,

ensure that it is replaced before using toaster. Crumb tray is

dishwasher safe.

5

Advertising
This manual is related to the following products: