Wi Digital Systems Wi-AudioLink Quick User Guide - Manual (Page 5)

Receiver Connection
PLEASE PROTECT YOUR EARS! Prolonged use of
headphones or In-Ear personal monitors at high
volumes may affect your hearing capacity or may
result in noise induced hearing loss (NHL).
1. Connect the 1/8” stereo end of the cable into
the “Audio Input” jack on the receiver.
2. Route the audio cable beneath the belt clip
as shown to prevent accidental disconnection
of the cable.
3. Connect the 1/4” male end of the cable to the
inputs of your amplifier, powered monitor,
sound system, mixer or foot pedal. Use the
L/MONO and R jacks on your gear when
using the system in stereo.
4. Power up the receiver by pressing and
holding the POWER button for 2 seconds.
5. Attach the receiver to your belt. Alternatively
the receiver can be placed next to the mixer,
amp, foot pedal or stomp box.
POWER
LINK
Audio Output
Jack
1/4” Y-Split to 1/8” Stereo Cable
v
(Rx)
v