Wildview STC-TGL-5M - Manual (Page 10)

Wildview Series
www.wildviewcam.com Toll Free 888-304-6125
10
Inserting SD card
Make sure camera is in the OFF position whenever adding or
removing memory

Insert SD memory card in to the SD card slot completely and in
the correct direction, as shown by the SD picture shown on
inner housing.

To remove the SD memory card, depress the SD card and pull
out the card gently.
 SD cards must be clean (no images from other sources).
 If you are using the SD card from other cameras, please
make sure to format the SD card in your computer prior to
use in the camera. New cards are good to use straight
from the package.
 If installed SD card with lock, camera will show LOC on the
display, please slide the lock switch to unlock location
then reinstall the SD card.