Wildview STC-TGL-X2IR - Manual (Page 22)

www.wildviewcam.com
Toll
Free
888-­‐304-­‐6125
22
(Option
#2)
Simply
remove
the
batteries
from
the
battery
compartment.
If
you
are
using
an
SD
memory
card
as
your
storage
device,
you
must
delete
images
by
following
the
step
described
above.
Low
Battery
Indicator:
Your
camera
is
equipped
with
a
low
battery
indicator.
The
Red
Low
Bat
LED
indicator
will
blink
when
battery
is
running
low.
1. Turn
off
the
camera.
2. Download
all
the
pictures
immediately.
NOTE:
DO
NOT
attempt
to
replace
the
batteries
before
you
have
saved
the
images
in
your
PC.
Once
the
batteries
are
drained
completely,
or
if
you
attempt
to
replace
the
batteries,
all
images
in
the
internal
SDRAM
memory
will
be
lost.
3. Replace
batteries.
Be
sure
to
use
brand
name
alkaline
batteries.
WARNING: Do not remove the batteries until you have downloaded all the
images off the internal SDRAM. Once the batteries are removed, all files in
the internal SDRAM will be deleted. (This does not apply to files stored on
SD memory card).