Winchester Repeating Arms Wildcat - Manual (Page 20)

M AGAZINE R EASSEMBLY —
1. Insert the follower with the rounded edge to the front
of the magazine.
2. Insert the spring assembly.
3. Place the floorplate catch on the spring. Make sure the
rounded edge of the floorplate catch is to the front.
4. Compress the spring until the floorplate catch is flush
with the bottom of the tube.
5. Hold the floorplate catch down inside the magazine
with one hand while you slide the floorplate onto
the rails, starting the floorplate at the front of the
magazine body and sliding it rearward, until the
floorplate catch snaps into position. The shape of the
floorplate corresponds to the shape of the floorplate
catch and the shape of the bottom of the magazine
body, rounded edges to the front, flat edges to the rear.
A slight tap on the forward curved surface of the floor
plate may be necessary to seat the catch into position.
6. The magazine is now ready for use.
P ARTS , S ERVICE , R EPAIR AND Q UESTIONS
If your Winchester rifle or shotgun should ever need service
or repair, it is often best to utilize one of our Authorized
Service Centers. In some cases it is appropriate to use the
Winchester Rifles and Shotguns Service Center in
Arnold, Missouri. A list of Authorized Service Centers
was included with your new firearm. If you need a new
listing, contact us. We can help you determine the best
place to service your firearm.
In order to avoid delays, it is important to never send your
gun directly to our facility without direct authorization
from one of our service specialists. This avoids possible
delays in obtaining service. Contact us at (800) 322-4626
for details on how to receive service before sending
your gun.
Parts listings, Service Center lists, service procedures,
service/repair form and general product information are
also found on the Web at: www.winchesterguns.com.
When returning your firearm for servicing, you must do
the following:
1. Be sure it is completely unloaded.
2. Remove the scope or other optics.
3. Package it securely in a cardboard container.
4. Enclose a letter with your firearm that clearly describes
the trouble experienced, the ammunition used and the
repairs desired. Also include your name and a daytime
phone number where you can be reached.
5. If convenient, send a copy of the letter to us separately.
6. Never return ammunition with your firearm. It is
against postal and most commerce regulations.
19
05-572-WFA_OM Wildcat 6 3/21/06 11:28 AM Page 19