Winchester Repeating Arms Select User Manual

Page 11

Advertising
background image

Incorrectly reloaded ammunition can cause serious

personal injury and damage to the firearm due to excessive

pressure. Reload only after proper instruction and in strict

compliance with instructions and data contained in

current reloading manuals.

Winchester ammunition is always an excellent choice for

your new Winchester firearm, delivering the unmatched

performance and dependability you want.

I

NITIAL

C

LEANING

/ O

ILING

Some metal parts of your new Select have been coated at

the factory with a rust preventative compound. Before

using your Select, clean the anti-rust compound from the

inside of the barrels, receiver area, locking pin mechanism,

extractors/ejectors, hinge surfaces and the chamber areas.

A high quality, lightweight gun oil should be used to

remove this compound and to give your new firearm its

first lubrication. Clean the barrels using a cleaning rod

and patch as explained under “Cleaning and Maintenance

Suggestions” found on page 26.

If your new Select is to be stored for an extended period

of time, it is permissible to leave the rust preventative

compound in place and keep your Select in its box for

maximum protection during long-term storage.

Before beginning assembly of your Select you should

first wipe the mechanism clean and apply a few drops

of quality oil on the surfaces shown (Figure 3).

Avoid applying too much oil. Only a light film is

necessary. Excessive oil should be wiped off, especially

in cold weather.

O

PERATION OF THE

S

AFETY

Your new Select shotgun is designed with a top-tang

mounted safety. It is located just rearward of the top lever

on the top tang, and is convenient for gloved or ungloved

fingers. It is operated with the thumb of your rearward

hand when holding the firearm in shooting position.

“On Safe” When pulled fully to the rear with your

thumb an “S” is exposed at the front of the safety

switch. This shows you visually that the safety is in the

“on safe” position (Figure 4A).

9

Be sure you lightly oil your Select

shotgun at these points.

FIGURE 3

Advertising