Winchester Repeating Arms 70 (Historic Manual) - Manual (Page 25)

OTHER CLEANING SUGGESTIONS —
• Never pour large quantities of oil into the receiver or
other parts. It can drain down to the wood and soften it
— and cause permanent damage and loosening of the
stock.
• After extended periods of heavy use, your gun should
be taken to a qualified gunsmith to have the action
disassembled for professional cleaning and lubrication.
NEVER ATTEMPT TO TAKE YOUR MODEL 70
APART FURTHER THAN EXPLAINED IN THIS
MANUAL.
This is a specialized, finely fitted mechanism. You may
permanently mar it by attempting to disassemble the
inner mechanism assemblies. If further disassembly for
service or cleaning is required, take your gun to a U. S.
Repeating Arms Company recommended Service Center
or a competent gunsmith as explained under “Service
or Repair.”
O RDERING P ARTS
To order parts, please write our parts department and
furnish the following: your name, address, and telephone
number. Also specify the caliber, model, serial number
and grade of your Winchester Model 70. When we
receive your request, we will send an order form and a
parts breakdown with prices.
Write to:
Parts Department
U.S. Repeating Arms Company, Inc.
275 Winchester Avenue
New Haven, Connecticut 06511-1970
CAUTION: PARTS ARE MADE FOR
WINCHESTER BRAND GUNS MANUFACTURED
BY U.S. REPEATING ARMS COMPANY, INC.,
AND SHOULD NOT BE USED IN OTHER GUNS
EVEN THOUGH MODELS MAY BE SIMILAR.
IMPROPERLY FITTED PARTS MAY BE
DANGEROUS.
24