CDA HVC 32 - Manual (Page 8)

8
Safety Hints
– Before you switch the hob on, make sure you know which
control keys control the required cooking zone. We advise you
to set the pan over the cooking zone before switching it on.
– Do not use pots and pans with rough bases (pay attention to
cookware made of cast-iron). Rough bases can damage the
glass surface of the hob (scratches).
– Always ensure that the base of your saucepan is clean and dry
before placing on the hob.
– Pots with aluminium bottoms may leave silver streaks or spots
on the hob.
– Do not leave wet or damp lids on the hob.
– The glass-ceramic surface and pans must be clean. Carefully
eliminate any food remains (especially containing sugar), dirt
etc. with the aid of a cleansing agent.
– Pan handles should never stand out beyond the kitchen
worktop, as there is a great danger of knocking the pan over.
This will also ensure that children cannot reach them.
– Do not use the hob if the glass surface is broken or
cracked in any way. Please disconnect the hob from the
mains and contact the after-sales service.
– Do not lean over the cooking plate when in use.
– Do not lay cooking foil or plastic materials on the ceramic
surface when it is hot.
– Remember that the surface remains hot for a long time (about
30 min.) after the cooking plate has been switched off.
– Follow the cleaning instructions carefully.
– Never use the glass surface for storage.
DISTORTED
PANBASE
WRONG
DISTORTED
PANBASE
WRONG
LEVEL
PANBASE
CORRECT
WRONG
WASTING
POWER
WRONG
WASTING
POWER
WRONG
WASTING
POWER
CORRECT
COMPLETE
USE OF THE
HEAT
• DO NOT USE GLASSWARE ON
CERAMIC HOBS.
• DO NOT USE PANS WITH ROUGH
CIRCULAR MACHINED BASE.
Fig. 5
Fig. 6