ORBIT FR StarBot 4300 - Manual (Page 6)

77
The overall system is composed of:
The base trolley
The base trolley moves the scanner to the measurement
area. It is mounted on four independent, directional wheels
(A, B, C, D). Once in position, four jacks (K) lock the trolley
to the ground.
The telescopic arm
The telescopic arm holds the spherical probe array and
provides four independent movements. An azimuth table
(E) ensures the rotation of the upper part of the trolley. An
arm (G) lifts the probe array which can be elevated with
an electrical actuator. Finally, a tilt axis positions the probe
array in place.
The measurement scanner
The measurement scanner is composed of a sturdy arch
mounted on a sliding structure (J) that allows the positio-
ning of the probe array. A rotation axis (I) rotates the array
720° so that a partial sphere surrounding the antenna
under test can be measured.
I StarBot 4300
StarBot 4300 with the arch in vertical position
3D radiation pattern of a radar
6 5
Copyright MVG 2014
Product specifications and descriptions in this datasheet are subject to change without notice.
Actual products may differ in appearance from images shown.