Wichita Clutch GMC - Grinding Mill Clutch - Manual (Page 7)

Standard Vent Clutches
142 Wichita Clutch 800-964-3262 P-1100-WC 1/12
Grinding Mill Clutches
Dimensions: inches
(Consult factory for drawing before final layout.)
Driving Adapters
The driving adapter is
de signed to allow the clutch
to be used in a shaft-to-
shaft or through-shaft
coupling ar range ment. The
quick-change feature, using
a driving elbow piece be -
tween the driving adapter
and the clutch driving ring,
enables replacement of any
wearing clutch part without
dis turb ing either shaft.
(See Notes 1 & 2)
Without axial
locking device
* Maximum bore uses rectangular key, contact Wichita Engineering.
Note: For mounting, use socket head capscrews conforming to the ASTM-574-97a.
Model C* C1* F*
Size Max. Bore Max. Bore Max. Bore
ATD– B Rect. Key Rect. Key D E Rect. Key G J L L1
211 GMC 3.00 3.00 — 5.00 2.00 3.00 4.25 11.94 10.00 —
214H GMC 3.25 4.13 — 6.25 2.13 3.38 5.75 16.31 11.88 —
314H GMC 3.25 4.13 — 6.25 2.13 3.38 7.18 16.31 13.38 —
318H GMC 6.00 4.00 — 6.00 4.38 4.00 7.31 21.31 17.43 —
321 GMC 6.00 6.50 — 9.00 4.00 5.38 8.63 21.31 20.50 —
324H GMC 7.31 7.50 — 10.00 5.56 5.38 8.43 27.00 21.56 —
327 GMC 7.31 7.63 — 11.50 5.56 7.00 9.00 27.00 20.94 —
230H GMC 8.75 9.38 9.38 14.00 6.50 7.00 7.88 32.38 22.63 24.43
330H GMC 8.75 9.38 9.38 14.00 6.50 7.00 10.88 32.38 25.25 26.94
336H GMC 10.00 9.38 9.38 14.00 7.88 8.00 12.88 38.25 26.75 34.75
342 GMC 10.00 12.00 12.00 18.00 7.43 10.00 11.88 44.13 27.63 34.50
248 GMC 13.63 15.00 13.25 20.00 10.13 12.00 10.88 52.38 29.63 36.88
348 GMC 13.63 15.00 13.25 20.00 10.13 12.00 13.63 52.38 32.13 39.50
260 GMC 16.25 18.00 15.00 24.00 12.25 14.00 16.25 61.50 40.00 42.50
360 GMC 16.25 18.00 15.00 24.00 12.25 14.00 20.00 61.50 43.75 46.25
460 GMC 16.25 18.00 15.00 24.00 12.25 14.00 23.50 61.50 47.13 49.63
560 GMC 20.25 17.00 17.00 30.00 16.25 17.00 27.00 61.50 — 57.20