LaMotte 2020 ClearTrace User Manual
Page 15
3.6 Sample Chamber Details
The sample chamber is designed for easy access and maintenance.
The chamber lid is lifted to gain access to the sample chamber. Set it on
top of the AV38 during chamber maintenance. When replacing the lid, it
should be aligned using the exterior alignment markers on the front edge of
the chamber and the lid.
*DataStick is a registered trademark of Thermo Fisher Scientific Inc. and
its subsidiaries.
14
Exterior marker to
align lid with sample
chamber
Sample Chamber Lid with
integral lamp assembly
Alignment hole
The alignment peg
on the Sample Chamber
must line up with the
alignment hole in
the lid.
Alignment peg
Chamber Lid with Lamp
Chamber Body
Sample Chamber
with bubble trap
Sample Chamber
with Lid in Place
Keep aperture dry
Sample Chamber
Bubble Trap
DataStick *with
Optical Sensor
Head can be
removed and
replaced.
TM
Lamp Assembly
The lamp assembly
screws into the lid.
The cable is routed
to the user terminal
box.
Lamp with Cable
Chamber Lid