Cavalry Storage CAXR SERIES - Manual (Page 11)

USB 2.0 "Y" cable as described above, then insert the eSATA cable into an
eSATA port. Then turn on the computer and it will detect the hard drive. See
the guide in "Contents/CAXR" folder on the CD to install an eSATA bracket.
Step 3.
Installing drivers for the Cavalry External Hard Drive.
Windows 2000/XP/Vista
Plug-and-play. No device drivers or configuration required. The
computer will detect the USB External Hard Drive as a new USB
device and display messages on the bottom-right corner reading
"USB Mass Storage Device Detected" and "Your new hardware is
installed and ready to use."
Windows 98/Me
1. Make sure Windows 98/Me is fully updated
2. Go to www.cavalrystorage.com/su_download.htm and click on
11 10