Cyclades AlterPath Manager 5000 - Manual (Page 2)

AlterPath Manager E2000, 2500, 5000 Quick Start Guide
2
a. The shorter end brackets mount onto the front of the outer rails. Use the two round screw
holes in each front end bracket to mount it in a fixed position to its respective outer rail.
b. The longer end brackets mount onto the rear of the outer rails. The long slots in each rear
end bracket can be adjusted to fit the bracket and outer rail assembly to the exact length of
the rack.
4. Slide the APM 2500 or 5000 into the front of the rack so the inner rails engage into the outer
rails.
2. Making the Ethernet Connection
Figure 1: APM E2000 Front View
Figure 2 provides a rear view of the AlterPath Manager E2000 with the ports, the power switch,
and the AC power connector. Figure 3 and Figure 4 provide similar information for the APM
2500. Figure 5 and Figure 6 provide similar information for the APM 5000.
Figure 2: APM E2000 Rear View with Ports, Power Connector, and Power Switch
Figure 3: APM 2500 Front View with Control Buttons
Figure 4: APM 2500 Rear View with Ports and Power Connector
Expansion slots Eth1 Eth0
USB port 2
USB port 1
AUX serial port
Reset
Console port
Fan
AC
connector
Power
switch
LCD panel
Press and hold for 1 second to power on the system.
Press and hold for 4 seconds to reset the system.
Press and hold for 10 seconds to shut down the system.
Fan
connector
AC USB Eth0 Eth1
Console