SARGENT L980A Keyed Removable Mullions - Manual (Page 2)

TO CHANGE OR INSTALL CYLINDER:
Slide chassis assembly into mullion and start lower mounting screw first.
With lower screw in place, install the two remaining screws through the support
plate and into mullion and tighten securely.
Tighten lower mounting screw securely.
4
With chassis installed and secure, depress latchbolt.
Hold bolt depressed and screw cylinder in (making sure blocking ring is on)
through mullion into chassis until it bottoms out.
Back off until keyway is at the bottom and name on the cylinder is straight.
Tighten locking screw so that end of locking arm mates with slot in the cylinder.
Tighten securely.
5
#10 - 32 X 3/8" LONG
MOUNTING SCREW
#10 - 32 X 1/2" LONG
MOUNTING SCREWS
SUPPORT PLATE
MULLION MULLION LATCHBOLT
ASSEMBLY INSTRUCTIONS for
L980 Mullion
FOR ASSISTANCE CONTACT SARGENT AT 800-727-5477 or www.sargentlock.com
Copyright © 2009, Sargent Manufacturing Company, an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the express written
permission of Sargent Manufacturing Company is prohibited.
A7102D
CYLINDER WITH
BLOCKING RING
MULLION LATCHBOLT
LOCKING
SCREW
ALLEN WRENCH