SARGENT 7800 Knob Locks User Manual
Page 5
Copyright © 2014, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
A7722D
Actuator with LX- wiring (8200 locks only)
RX- wiring (7900 & 8200 locks)
52-2978 Adaptor Harness (8 & 4-pin
connectors to 6 wires and 8-pin
connector). Plug in between lock
and raceway harness.
Electric Hinge
with 8-pin connector
Pigtail Harness with
8-pin connector
Raceway harness
with 8 & 4-pin
connector. 4-pin
connectors are not
used here.
LX- switch monitors latchbolt retraction
Black
(-),
1
Red
(+),
2
Blue (NC), 6
Orange (NO), 5
Green (C), 4
Solenoid
Connections
LX -
Switch
Connections
1
7
5
6 4
3
2
8
The LX-switch is in the
Normal Open position, when
the latch is extended.
LX-8270,71,72
or 73 lock with
8 & 4-pin
connectors
Red (+)
Black (-)
Tan (NC)
Pink (NO)
Grey (C)
Actuator wiring (2 wires)
LX- wiring (3 wires)
Electric Hinge
with 8-pin
connectors
Pigtail harness
with 8-pin connector
RX- switches monitor inside and
outside levers independently
6 wires
Orange (NC), 5
Green (NO), 4
Yellow (NC), 8
Blue (C), 6
Brown (NO), 7
White (C), 3
RX -CAP Side
Switch
Connections
RX - CASE Side
Switch
Connections
1
7
5
6 4
3
2
8
RX- wiring (6 wires)
Raceway harness
with 8 & 4-pin
connector. 4-pin
connectors are not
used here.
The RX-switches are in the
Normal Open position, when
levers are untouched and the
latch is extended.
RX-7900 or
RX-8200 series
lock with 8-pin
connector
5
For LH and LHRB doors, outside monitor is the case side and inside monitor is the cap side.
For RH and RHRB doors, outside monitor is the cap side and inside monitor is the case side.
ASSA ABLOY, the global leader
in door opening solutions