SARGENT 7900 Mortise Lock - Manual

A7859:C 7-16-10
1
All trim components shown will vary by function number
Trim one-side functions - refer to separate instruction sheet
Tools Required:
• Phillips screwdriver (# 2 and # 3 size)
• Flat blade screwdriver
• T20 Torx wrench
Part # Description Req.
1 ———– Inside lever/knob
(designs vary- some handed)
1
2 82-1038 Lever set screw 10-32 (T20 Torx head) 1
3 82-0347 Lever spring 2
4 ———– Rose (designs vary) Escutcheons optional 2
5 01-1495 Machine screw #8-32 x 5/8" 2
*6 82-4577 Inside adapter & plate assembly 1
7 82-0368 Spindle 2
8 81-0723 Through-bolt posts 2
*9 82-0691 Bushing 1
*10 82-4576 Outside mounting plate assy. 1
11 ———– Outside lever/knob
(designs vary- some handed)
1
12 ———– Lockbody (functions vary) 1
13 01-1019 Metal/machine screw #12-24 x1/2" 2
14 ———– Outside front plate (functions vary) 1
15 01-1028 Metal/machine screw #8 - 32 x 1/4" 2
16 01-1019 Machine screw # 12 - 24 x 1/2" 2
17 82-0110 Curve lip strike (1-1/4" lip) 1
18 130W Thumb Turn 1
19 97 Rosette Cylinder Collar/Rosette 1
20 ———– Cylinder-per function only (key systems vary) -
21 184W Emergency release 65 & 66 Functions 1
Instructions for Installing
SARGENT 7900 Lever or Knob Mortise Lock
Outside Lever
& Rose Assembly
(“O” Rose with “BL” Lever)
18
19
21
12
16
17
15
7
8
9
10
4
3
11
3
2
1
4
7
6
5
20
* IMPORTANT: Knob trim has
different mounting plates and
bushings than the lever trim.
Screw Pack for all lockbodies - Lockbody,
front & strike screws (part #77-4236).
Strikes - Standard strike part# 82-0110- 1-1/4"
lip x Lip Length x Finish (wrought box strike -
optional)
14
13
Copyright © 2006-2010, Sargent Manufacturing Company,
an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express
written permission of Sargent Manufacturing Company
is prohibited.
U.S. Patent Number: 5,678,870