ClearOne Titan Articulating Arm Dual Media Cart User Manual
Page 7
Page 7
Step 6
1.
Assemble the mounting for each TV display. Place the TV’s face down on a safe, non-scratch solid surface. Use the TV
Brackets, Inner Brackets, Spacers, M4, M5, M6 or M8 screws, lock washers and washers suitable to the mounting holes
of the TV. Position the TV Inner Brackets inside the TV Brackets, adjust to the proper spacing for your mounting holes, then
place screws, washers and optional spacers so that the assemblies are firmly in place. Do not overtighten the screws or
use power tools for assembly.
Optional
Spacers
2 (per TV) [4]
TV Bracket
Reinforcing Plate
TV Inner Bracket
TV Mounting Tray
K
M
L
2.
Mount the Reinforcing Plate on the TV Tray, then the TV Tray with Reinforcing Plate to the TV Brackets. Slots in the TV
brackets and TV mounting tray may be used to adjust the vertical and horizontal position of the TV’s, respectively.
Depending on the size of the TV’s, this might be necessary to clear the top of the cart or to adjust the gap between the
units. Do not overtighten the screws or use power tools for assembly.