ClearOne Converge Pro - Manual (Page 225)

Appendix A: Serial Commands 221
eneTsUbn – Ethernet Subnet Mask
This command selects/reports the Subnet mask of the ethernet port on the unit.
Command Form : DEVICE eneTsUbn [Value]
argument Type size values Units
Value ip Address 4 (null to query in text)
eReF – Expansion Bus Reference
This command selects an output or reports which output is the expansion bus reference.
Command Form : DEVICE eReF <Channel> [Value Channel Value Group]
argument Type size values Units
Channel Channel 1 See reference Channels in Groups and channels
Group Group 1 8 (A)
Value Channel 1 0 = none
See 2, 20 (o, B) in Groups and channels
(null to query in text)
Value Group 1 0 for none or 2, 20 (n for none or o, B)
FilTeR – Filter Adjust
This command selects/reports the settings of a filter.
Command Form : DEVICE FilTeR <Channel> <Group> <node> [Type Frequency Gain/Slope Bandwidth/
Subtype]
argument Type size values Units
Channel Channel 1 See Groups and channels
Group Group 1 3, 5 (m, p)
node unsigned
integer 1 Group 3 1 – 4
Group 5 1 – 15
Type unsigned
integer 1 0 = none
1 = All pass
2 = low pass
3 = High pass
4 = low Shelving
5 = High Shelving
6 = parametric equalizer
7 = Cd Horn
8 = Bessel Crossover
9 = Butterworth Crossover
10 = linkwitz-riley Crossover
11 = notch
(null to query in text)
Frequency unsigned
Float 4 Type 0 0 (null in text) Hz
Type 1 – 6, 8 – 11 20.00 – 20000.00
Type 7 500.00 – 5000.00
Gain/Slope Signed Float 2 Type 0 – 3, 7, 11 0 (null in text) dB /
dB per
octave
Type 4 – 6 -15.00 – 15.00
Type 8 – 9 12, 18, 24
Type 10 12, 24
Bandwidth/Subtype unsigned
Float
2 Type 0 – 5, 7 0 (null in text) octaves /
Type
Type 6, 11 0.05 – 5.00
Type 8 – 10 2 = low pass
3 = High pass