ClearOne MU4602 - Manual (Page 31)

HOW TO SET STATION PRESETS (MU4602KP50-FM ONLY)
All specifications subject to change without notification. All rights reserved. Copyright©2004 NetStreams
main.512.977.9393 / fax.512.977.9398 / 3600 W. Parmer Lane Suite 100, Austin, TX 78727 / www.netstreams.com
NS-1104-7069 27
How to Set Station Presets
The Musica MU4602KP50-FM allows you to program in 8 FM stations for preset playback. To do this, tune to the station
you wish to program in, then press and hold the Mode key till the “P” starts flashing. Then press and hold the
corresponding hard key numbered for that preset.
e.g. If you would like to have FM 101.3 as your preset station number 1, first tune to 101.3, then press and hold the MODE
key till the “P” starts flashing, the press and hold the hard key labeled 1 for 5 seconds until the LCD menu confirms storage
of that station as a preset.
Tuning modes
The Musica MU4602KP50-FM allows you to tune radio stations using the left and right directional arrows on the keypad.
This keypad has four tuning modes. You are able to toggle through the modes by pressing the mode button on the keypad;
MANUAL TUNING (MT)
In this mode you can move up or down
frequencies step by step by using the left and
right arrow keys.
SEEK TUNING (SE)
In this mode you can automatically move up
and down frequencies until a station is found.
Once a station is found the radio will stop and
stay on this station.
SCAN TUNING (SC)
In this mode you can automatically move up
and down frequencies until a station is found.
Once a station is found the radio will stay on
this station for 4 seconds, and then continue
until the next station is found. Pressing any
button will stop the scan and leave on the last
know station.
PRESET TUNING (PR)
In this mode you can automatically move up or
down stored presets and stay on a preset for
four seconds, then move to the next preset.
Pressing any button will stop the scan and
leave you on the last know preset.