Chapter 3: user options – ClearOne MAX IP/MAXAttach IP User Manual
Page 32
Chapter 3: User Options 29
CHAPTER 3: USER OPTIONS
PROGRAMMING OPTIONS
To allow for individual preferences and enhance ease of use, the following features can be programmed: DHCP, host IP,
subnet mask, default gateway IP address, ringer melody, VLAN on/off, help line number, and AGC/ALC. You can also
restore factory defaults.
Change Dynamic Host Configuration Protocol (DHCP)
1. Press and hold the REDIAL/PROG key until the Program icon appears on the LCD screen (Figure 3.1).
2. Press 1 to enter the DHCP menu. There are two options: 1 - enable DHCP; and 0 - disable DHCP.
3. Press REDIAL/PROG. The current DHCP setting flashes.
4. Press keys 1 or 0 to enable or disable DHCP.
5. Press REDIAL/PROG to save the selection - a confirmation tone will play.
6. Press CLEAR to exit programming. The phone will reboot.
Change Host IP Address
1. Press and hold the REDIAL/PROG key until the Program icon appears on the LCD screen (Figure 3.1).
»
NOTE: DHCP must be disabled in order to change the host IP address manually.
2. Press 2 to enter the Host IP Address menu. The current host IP address is displayed.
3. Press REDIAL/PROG. The current host IP address flashes.
4. Press and hold CLEAR to erase the current host IP address.
5. Using the number keys, enter the desired host IP address.
6. Press REDIAL/PROG to save the selection; a confirmation tone plays.
7. Press the CLEAR button to exit programming. The phone will reboot.
Change Subnet Mask
1. Press and hold the REDIAL/PROG key until the Program icon appears on the LCD screen (Figure 3.1).
»
NOTE: DHCP must be disabled in order to change the subnet mask manually.
2. Press 3 to enter the
Change Subnet Mask menu. The current subnet mask is displayed.
3. Press REDIAL/PROG. The current subnet mask flashes.
4. Press and hold CLEAR to erase the current subnet mask.
5. Using the number keys, enter the desired subnet mask.
6. Press REDIAL/PROG to save the selection; a confirmation tone plays.
7. Press CLEAR to exit programming. The phone will reboot.
Figure 3.1 - MAX IP Program Icon