Cisco ONS 15600 - Manual (Page 2)

11-2
Cisco ONS 15600 Procedure Guide, R5.0
February 2008
Chapter 11 Change Card Settings
NTP-E157 Provision a Multirate PPM
NTP-E157 Provision a Multirate PPM
Step 1 Complete the “DLP-E26 Log into CTC” task on page 16-39 to log into an ONS 15600 on the network.
Step 2 Click the Alarms tab:
a. Verify that the alarm filter is not turned on. See the “DLP-E157 Disable Alarm Filtering” task on
page 17-50 as necessary.
b. Verify that no unexplained conditions appear on the network. If unexplained conditions appear,
resolve them before continuing. Refer to the Cisco ONS 15600 SONET Troubleshooting Guide.
c. Complete the “DLP-E76 Export CTC Data” task on page 16-98 to export alarm and condition
information.
Step 3 In node view, double-click the ASAP card where you want to provision PPM settings.
Step 4 Click the Provisioning > Pluggable Port Modules tabs.
Step 5 In the Pluggable Port Modules pane, click Create. The Create PPM dialog box appears.
Step 6 In the Create PPM dialog box, complete the following:
• PPM—Click the slot number where the SFP is installed from the drop-down list.
• PPM Type—Click the number of ports supported by your SFP from the drop-down list. If only one
port is supported, PPM (1 port) is the only menu option.
Step 7 Click OK. The newly created port appears on the Pluggable Port Modules pane. The row on the
Pluggable Port Modules pane turns light blue and the Actual Equipment Type column lists the equipment
name.
Step 8 Verify that the PPM appears in the list on the Pluggable Port Modules pane. If it does not, repeat Steps
5 through 8 .
Step 9 Repeat the task to provision a second PPM.
Step 10 Click OK.
Step 11 Continue with the “NTP-E151 Provision an Optical Line Rate” procedure on page 11-3 to provision the
line rate.
Stop. You have completed this procedure.
Purpose This procedure provisions a multirate pluggable port modules (PPMs) in
CTC.
Tools/Equipment None
Prerequisite Procedures NTP-E147 Install the ASAP Card, page 2-5
DLP-E211 Install the ASAP 4PIO Modules, page 18-12 , as needed
DLP-E215 Install an SFP, page 18-14 , as needed
Required/As Needed Required
Onsite/Remote Onsite or remote
Security Level Provisioning or higher