Dymo LabelManager 500TS - Manual (Page 18)

18
Troubleshooting
Review the following possible solutions if you encounter a problem while using your label maker.
If you need further assistance, visit the DYMO Web site at www.dymo.com.
Documentation Feedback
We are constantly working to produce the highest quality documentation for our products. We welcome your feedback.
Send us your comments or suggestions about our user guides. Please include the following information with your
feedback:
 Product name, model number, and User Guide page number
 Brief description of instructions that are inaccurate or unclear, areas where more detail is needed, and so on
We also welcome your suggestions about additional topics you would like to see covered in the documentation.
Send email messages to: [email protected]
Please keep in mind that this email address is only for documentation feedback. If you have a technical question, please
contact Customer Support.
Problem/Error Message Solution
No display  Ensure the label maker is turned on.
 Attach the charging adapter to the label maker to recharge the battery pack.
See Charging the Battery Pack.
Poor Print Quality  Attach the charging adapter to the label maker to recharge the battery pack.
See Charging the Battery Pack.
 Clean the print head. See Cleaning Your Label Maker.
 Ensure the label cassette is installed properly.
 Replace the label cassette.
No label cassette inserted Insert a label cassette.
Text exceeds printable area  Delete some or all of the buffer text.

Decrease the font size.
 Select the Auto-fit text check box on the Font tab of the Label Edit screen.
 Delete lines to fit on the label width.
 Insert a wider label cassette.
Battery level is low  Attach the charging adapter to the label maker to recharge the battery pack.
See Charging the Battery Pack.
 Ensure the battery pack is inserted correctly. See Inserting the Battery Pack.
 Replace the battery pack.
Label jam  Remove jammed label; replace label cassette.
 Clean cutter blade.
Cutter jam  Remove jammed label; replace label cassette.
 Clean cutter blade.
Unable to print Insert the battery pack and try again. See Inserting the Battery Pack.
How do I remove the backing from the label? DYMO labels have an easy-to-peel split back.
1 Locate the split on the label backing.
2 Gently pinch the label lengthwise, folding toward the
printed side of the label. The label backing will
separate.
3 Carefully peel away the backing from the label.
Split label