Dymo LabelManager Wireless PnP Quick Start Guide - Manual (Page 14)

10
6 Do one of the following:
• If this is the first DYMO label printer installed on the computer, click Yes
when prompted by the software to add the label maker as a wireless printer.
• If a DYMO label printer is already installed on the computer, choose Add
Network Printer from the File menu.
7 Follow the instructions in the Add Network Printer tool.
To add the wireless printer to a Mac OS ® system
1 Download DYMO Label™ v.8.5 or later from the Support section of the
DYMO Web site at www.dymo.com.
2 Double-click the Installer icon and follow the on-screen instructions.
When the software installation is complete, you are prompted to connect
your printer.
3 Without connecting your printer, click Finish, and then start the software.
4 Do one of the following:
• If this is the first DYMO label printer installed on the computer, click Yes
when prompted by the software to add the label maker as a wireless
printer.
• If a DYMO label printer is already installed on the computer, choose Add
Network Printer from the File menu.
5 Follow the instructions in the Add Network Printer tool.
To print to the label maker wirelessly
1 Restart DYMO Label software.
2 If you have more than one DYMO label printer installed,
do the following:
a Click the printer image in the DYMO Label software
Print area.
All of the label printers that are installed on your
computer are displayed.
b Select the LabelManager Wireless PnP (nnnnnnnnnnnn) printer.
3 Click to print your label.