CREATIVE X Board.book E-MU - Manual (Page 56)

E-MU Xboard Control
E-MU Systems 56
As you can see in the illustration below, Zones 1 and 2 have been set up so they
have the same velocity range, but occupy different areas of the keyboard. This type
of setup is useful for playing different synthesizers with the same controller.
Zones 3 and 4 occupy the same region of the keyboard, but use different velocity
ranges. This type of setup is useful for velocity crosswitching between samples.
Zones Settings
Enable/Disable Zones, and choose Zones settings in the bottom half of the Zones
tab.
Global Zones Settings
The Enable All and Octave Transpose controls affect
all four zones.
Zones Enable
This button enables/disables Zones. This serves the
identical function as the Zones enable button on the
Xboard 61.
Octave Transpose Mode
These radio buttons determine what method of octave transposition is used when
zones are enabled.
X Board.book Page 56 Wednesday, April 12, 2006 10:44 AM