Combi NINNA NANNA PA-138V - Manual (Page 18)

Back-carry
position
(After
n
eck
m
uscle
d
eveloped
u
p
to
around
30
months)
17
Preparation for back-carrying
Adjust waist belt length
Store Combi buckle into shoulder strap and adjust
waist belt with Combi ladder buckle
➁
to fit user.
● To adjust
Lift the end of Combi ladder buckle
and adjust waist belt length.
Twisted
Waist belt
Combi
ladder
buckle
➁
WARNING
WARNING
Shoulder strap
Combi buckle
Or
As baby is not seen in back-carry position, it is recommended to unseat baby and
check baby's status once every 30 mins.
Advice
Waist belt is made
twisted to better fit
user's body.
Please try to tighten waist belt as
much as possible to use. After
adjustment, Combi ladder buckle
➁
should be located at around upper
waist of user. If the gap between user
and baby is too large or too loose,
it may cause baby to fall off carrier
while in use.
Try to adjust waist belt such that left
and right belt end are in same length.
Back-carrying
• Make sure "side lock", "side snap" and
"safety buckle" are secured to prevent
baby from accidentally falling off while
in use.
• Try to tighten "safety belt" and "waist
belt" as much as possible to use. A carrier
that is too loose or a carrier of which belt
ends are in different length may cause
baby fall off the carrier upon its sudden
and unexpected movement.
• Seat baby at a safe place. (It is
recommended to have a third person to
assist the operation.) Seating or
unseating baby at an unsafe place may
cause baby to fall off from the carrier.
Refer to step 4, 5 and 6 of "To seat baby
whose neck muscle is yet to develop" (P.7~8)
for how to secure side lock, side snap and
safety buckle, and also the way to adjust safety
belt length.