Operation instructions, Setting temperature – Allavino VWR1201-SRT FlexCount Series 128 Bottle Single Zone Wine Refrigerator with Towel Bar Handle - Right Hinge User Manual

Page 6

Advertising
background image

Operation Instructions

The wine cellar should be placed in an area where the ambient temperature is between 32-100 degrees Fahrenheit. If

the ambient temperature is above or below this range, the performance of the unit may be affected. For example,

placing your unit in extreme cold or hot conditions may cause the interior temperatures to fluctuate.

Your Allavino Wine Cellar includes an operating panel on the front. The operating panel includes several features to

operate and control the temperature of the wine refrigerator, including:

ON/OFF - Turns the unit on or off

TEMP SET - Displays the desired temperature on an LED display

UP/DOWN Buttons – Increases or decreases the temperature in 1 degree increments

DISPLAY – Displays the temperature inside of the unit

°C / °F – Indicates whether the displayed temperature is in Celsius and Fahrenheit

°C / °F Button – Toggles the displayed temperature between Celsius and Fahrenheit

LIGHT - Turns the interior light on or off

RED/WHITE/SPARKLE – Indicates whether the set temperature is ideal for storing mostly red, white, or sparkling wines

If you are going on vacation, you may leave the wine cellar operating during vacations of less than three weeks. If the

appliance will not be used for several months, you should remove all items and turn off the appliance. Clean and dry the

interior thoroughly. To prevent mold growth, leave the door open slightly, blocking it open if necessary.

Setting Temperature

This Allavino Wine Cellar has a wide enough temperature range to store red, white, or sparkling wine, depending on

your preference. Different varietals of wine require different temperature settings. Red wine is generally stored

between 50 and 65 degrees Fahrenheit, while white wines are stored between 40 and 50 degrees Fahrenheit. White

wine can be stored at red wine temperatures for a short period of time (less than three months), and flash chilled before

serving.

You can set the temperature as you desire by touching the UP or DOWN button. When you touch the buttons for the

first time, the LED readout will show the original temperature set at the manufacturing facility. Each push of the button

will adjust the temperature by one degree in the desired direction. Please be aware that the desired temperatures may

fluctuate depending on whether the interior light is ON or OFF and depending on the orientation of the bottles.

PLEASE NOTE:

• In the event of a power interruption, all previous temperature settings will be automatically saved and each

compartment will return to the previous temperature setting.

• If the unit is unplugged, loses power, or is turned off, you must wait 3 to 5 minutes before restarting. Attempting

to restart the wine cellar before this time has elapsed may prevent it from starting.

• When you use the wine cellar for the first time or restart the wine cellar after having been shut off for a long

time, there will be a few degrees variance between the temperature you select and the one indicated on the

LED readout for the first few hours of operation. After a few hours of operation, the temperature will normalize

to the displayed temperature.

www.allavino.com

6

1-800-710-9939

Advertising