Monarch Instrument Nova-Strobe PBL - Manual (Page 18)

14
3.8.2 Backlight
Enables the display backlight to be turned on or off. After pressing
the MENU button rotate the knob until the display bottom line
shows
BLITE and press the MENU button again. The top line
of the display will show Yes or No selected by rotating the knob
counterclockwise (yes) or clockwise (no). The backlight will turn
on and off accordingly. Press the MENU button to select, then
any other key to exit. The display will show
DONE and return to
the normal readout.
3.8.3 Input Pulse Edge
Sets the input pulse edge that triggers the stroboscope. After
pressing the MENU button rotate the knob until the display bottom
line shows
INPUT and press the MENU button again. The top line
of the display will show the PoS (for positive edge triggered) or
nEg (for negative edge triggered) selected by rotating the knob
counterclockwise (PoS) or clockwise (nEg). Press the MENU
button to select, then any other key to exit. The display will show
DONE and return to the normal readout.
3.8.4 Output Pulse Polarity
Sets the polarity of the output pulse. After pressing the MENU
button rotate the knob until the display bottom line shows
OUTPT
(Output) and press the MENU button again. The top line of
the display will show the
PoS (for positive edge triggered) or
nEg (for negative edge triggered) selected by rotating the knob
counterclockwise (PoS) or clockwise (nEg). Press the MENU
button to select, then any other key to exit. The display will show
DONE and return to the normal readout.