Pto safety, Safety decals, Decal installation – Wheatheart WHR 80/100 x 31-71ft Augers PTO-SD User Manual
Page 12: Safety decal locations, Pto safety 2.7. safety decals, Decal installation 2.7.2. safety decal locations
2. S
AFETY
WHEATHEART - GHR & WHR GRAIN AUGERS
2.6. PTO S
AFETY
PTO-SD D
RIVE
M
ODEL
12
30641 R1
result. Use of unauthorized parts will void warranty. If in doubt, contact
WHEATHEART or your WHEATHEART dealer.
• Do not modify any auger components without authorization from WHEAT-
HEART. Modification can be dangerous and result in serious injuries.
2.6. PTO SAFETY
• Never use a PTO driveline without a rotating shield in good working order.
• Ensure PTO driveline is securely attached at both ends before operating.
• Before starting tractor, turn power to PTO to the off position (where applica-
ble).
• Keep body, hair, and clothing away from rotating PTO driveline.
• Ensure the PTO driveline shields turn freely on the PTO driveline.
• Do not exceed operating speed of 540 rpm.
• Keep u-joint angles small and equal. Do not exceed recommended operating
length for PTO driveline.
2.7. SAFETY DECALS
• Keep safety decals clean and legible at all times.
• Replace safety decals that are missing or have become illegible. See decal
location figures that follow.
• Replaced parts must display the same decal(s) as the original part.
• Safety decals are available from your distributor, dealer, or factory.
2.7.1. D
ECAL
I
NSTALLATION
1. Decal area must be clean and dry, with a temperature above 50°F (10°C).
2. Decide on the exact position before you remove the backing paper.
3. Align
the
decal over the specified area and carefully press the small portion
with the exposed sticky backing in place.
4. Slowly peel back the remaining paper and carefully smooth the remaining
portion of the decal in place.
5. Small air pockets can be pierced with a pin and smoothed out using the sign
backing paper.
2.7.2. S
AFETY
D
ECAL
L
OCATIONS
Replicas of the safety decals that are attached to the equipment are shown in the
figure(s) that follow. Proper safety procedures require that you familiarize
yourself with the various safety decals and the areas or particular functions that
the decals apply to, as well as the safety precautions that must be taken to avoid
serious injury, death, or damage.