Wheatheart Post Pounder - Manual (Page 7)

W HEATHEART - P OST P OUNDER 1. I NTRODUCTION
H IGH & H EAVY H ITTER AND H IGH & H EAVY H ITTER P LUS
IM4 R3 7
1.1. PURPOSE OF THE EQUIPMENT
The Post Pounder is designed and manufactured for the efficient installation of
fence posts. Before operating near power lines or buried gas lines, consult local
utility companies. Ensure all support legs are secured on the ground before
operating. Use only a tractor, towing vehicle or skid steer loader of adequate
power and capacity to operate the machine. Use in any other way is considered
as contrary to the intended use.
The following are unacceptable misuses of the Post Pounder. Damage caused
by such misuse is not covered by warranty. When operating or maintaining the
Post Pounder, NEVER:
• let impact head free fall without pounding a post, if head must be lowered,
shut off and lock out power source and gently actuate hydraulic valve.
• use the hugger to straighten crooked post.
• use hands to isolate and identify leak.
• position a foot under the machine.
• transport without fully retracting the pounder mast head.
• modify the equipment.
This equipment should be operated, serviced, and repaired only by persons who
are familiar with its particular characteristics and who are acquainted with the
relevant safety procedures. Any arbitrary modifications carried out on this
equipment may relieve the manufacturer of liability for any resulting damage or
injury.