CBC ZR-DH1621NP - Manual (Page 15)

1) PORT A (RS-422)
Used for communicating with external
devices in full-duplex RS-422.
2) LAN
10/100 Base-T ethernet connection.
3) PORT B (RS-422/RS-485)
Used for communicating with external
devices in full-duplex RS-422 or half-duplex
RS-485
4) ALARM IN
16 alarm inputs.
5) ALARM OUT
4 alarm outputs.
6) S-VIDEO
Monitor output as S-VIDEO signal.
7) IEEE 1394
Connect external IEEE 1394 devices
(FireWire) such as HDD and CD-RW.
8) MONITOR
Monitor output as composite signal.
9) SPOT OUT
Spot monitor output as composite signal.
10) AUDIO IN/OUT
RCA terminals for audio recording and
playback.
11) POWER Switch
Main power switch.
12) VIDEO INPUT & LOOP OUT (1~16)
Connect asynchronous video signal 1.0
Vp-p (75 ohm). Loop out is changed to
HI-Z automatically.
13) AC SELECT
Select AC115V or 230V.
14) AC INLET
Input power voltage.
Notice
Connect and power IEEE 1394
devices prior to powering DVR. Some
devices may not be recognized when
both HDD and CD-R/RW devices are
present.
5
REAR
1 2 4 5 9 10 8 7 6 3 11
12 13 14