Great Plains 2551SC Operator Manual - Manual (Page 19)

10/09/2013 540-179M
Great Plains Manufacturing, Inc. 15
Operating Instructions
This section covers general operating procedures. Expe-
rience, machine familiarity, and the following information
will lead to efficient operation and good working habits.
Always operate farm machinery with safety in mind.
Pre-Start Checklist
Perform the following steps before transporting the Seed-
bed Conditioner to the field.
❑ Carefully read “Important Safety Information” on
page 1.
❑ Lubricate Seedbed Conditioner as indicated under
“Lubrication” on page 18.
❑ Check all tires for proper inflation.
❑ Check all bolts, pins, and fasteners. Torque as
shown in “Tire Inflation Chart” on page 21.
❑ Check Seedbed Conditioner for worn or damaged
parts. Repair or replace parts before going to the
field.
Check hydraulic hoses, fittings, and cylinders for leaks.
Repair or replace before going to the field.
High Pressure Fluid Hazard:
Relieve pressure and shut down tractor before connecting, dis-
connecting or checking hydraulic lines. Use a piece of paper
or cardboard, NOT BODY PARTS, to check for leaks. Wear
protective gloves and safety glasses or goggles when working
with hydraulic systems. Escaping fluid under pressure can
have sufficient pressure to penetrate the skin causing serious
injury. If an accident occurs, seek immediate medical assis-
tance from a physician familiar with this type of injury.