Great Plains P17897B Operator Manual - Manual (Page 39)

39 X-Press
Operating Instructions
6. Faults and Remedies
X-Press Troubleshooting
Fault Possible Cause Remedy
Wings riding up at outside
of machine.
Wings not pressured down. Raise onto transport
wheels and pressure wings
down.
Wing pressure too low. Increase wing pressure.
Hard conditions. Increase wing pressure.
Centre section riding up. Wing pressure too high. Reduce wing pressure.
Machine ‘bouncing’ in work. Disc angle too great. Reduce disc angle.
Speed too fast. Reduce speed (<12kmh).
DD Roll blocks regularly. Scrapers incorrectly
adjusted
Adjust scrapers to clear dirt
from between DD Rings.
Conditions may not be
ideal for using machine.
Wait for more favourable
conditions.
6. Faults and Remedies