Control4 Wireless Thermostat - Manual (Page 22)

22
Additional Programming
Your authorized reseller can help you configure additional preferences for your Wireless Thermostat or Control4
system. These include:
• The use of Celsius, instead of default setting Fahrenheit.
• The use of the Remote Sensor, instead of the default setting On-board Temperature Sensor.
• The use of a Custom Overshoot and Undershoot settings.
• The use of Locked buttons to disable use of buttons, instead of default setting Unlocked buttons.
• The use of the 24 hour clock, instead of the default setting 12 hour clock.
• The use of Date-listed first format — DD/MM/YYYY, instead of Month-listed first format — MM/DD/YYYY.
• The ability to define interaction between the Wireless Thermostat and the other devices on the Control4
system.
Battery Maintenance
NOTE: The Wireless Thermostat requires power from the heating and cooling system to maintain regular
communication with the controller. The battery is intended to provide supplemental or backup power only.
• Keep battery contacts and compartment clean.
• Remove battery if thermostat use is not expected for several months.
• To prevent battery shorting, leakage or rupture, when replacing the battery:
• Use a CR123A (3V) Battery only.
• Do not attempt to recharge a battery unless the battery is specifically marked “rechargeable.”
• Never dispose of batteries in a fire.