Cabletron Systems FDDI - Manual (Page 12)

Chapter 1: Introduction
1-4 7F06-02 FDDI SmartSwitch Interface Module User’s Guide
1.3.3 Connectivity
The 7F06-02 Module has one backplane connection and two sets of A/B
front panel FPIM connections. The backplane connection provides power
to the 7F06-02 Module and a channel for communication with the 7X00
SmartSwitch Control Module. The two front panel FPIMs provide FDDI
connections, allowing the use of single mode or multimode fiber cable
with MIC or SC type connectors.
1.4 RELATED MANUALS
The following Cabletron Systems manuals supplement the procedures
and other technical data provided in this manual. The procedures will be
referenced, where appropriate, but will not be repeated.
7X00 SmartSwitch Control Module User’s Guide
7F06-02 Local Management Appendix
7C03 MMAC SmartSwitch Installation Guide
7C04 Workgroup SmartSwitch Installation Guide
7C04-R Workgroup SmartSwitch Installation Guide