Cabletron Systems ELS10-26 - Manual (Page 123)

ELS10-26 MIB
6-11
lxadminLEDProgramOption {lxadmin 23}
Integer Read-Write
Meaning of the LED display when led-programmed has been
selected for lxadminButtonSelection. Value is:
program-led-any-error (1)
6.1.4 Software Distribution Group
lxswdisDesc {lxswdis 1}
Octet String Read-Only
The description (0-32 bytes) of the software set currently being
downloaded, or a description of the software set last downloaded
since the ELS10-26 booted.
lxswdisAccess {lxswdis 2}
Integer Read-Write
The version of software that may be downloaded. Attempts to
download other versions of software will be rejected. The value for
lxswdisAccess is embedded within the software files that are to be
distributed via TFTP. Its value may be derived from the names of
the software files. For example, file name dnld_hdr.10.2 indicates
that the file contains Version 10.2 software. The corresponding
value for lxswdisAccess would be 523, and can be determined by
the following algorithm start with the number 1, add the first
number, add 256 times the second number, add 256 times 256 times
the third number (if present), and add 256 times 256 times 256
times the fourth number (if present). In addition, the NMS
operator may wish to use the following special values:
• protected (1) - No software downloads will be accepted.
• any-software (2) - A software download of any version of new
software will be accepted - this is the factory default.