5113-5115 wings, Light brackets, 5113-5115 wings light brackets – Great Plains TC5319 (S/N A1420X+) Predelivery Manual User Manual
Page 19
Great Plains Manufacturing, Inc.
Assembly
15
03/06/2014
566-224Q
5113-5115 Wings
Refer to Figure 17
66. Attach wings
with 3/4 x 2 1/2 hex bolts
3/4 lock
washers and 3/4 nuts.
67. Tighten all u-bolts to specs, See “Torque Values
Note: Folding models will be shipped with wings attached.
Light Brackets
Note: Model 5109 light brackets will be installed in the
proper location but turned towards inside of ma-
chine. See machine layout in Appendix for proper lo-
cation.
Refer to Figure 18
68. Remove 1/2 x 4 1/32 x 7 1/4 u-bolts
from light
bracket assembly
. Rotate light bracket assembly
180 degrees. Re-install 1/2 x 4 1/32 x 7 1/4 u-bolts
,
secure with 1/2 lock washers and 1/2 nuts.
69. Tighten all u-bolts to specs, See “Torque Values
70. Attach light plug
to light wiring harness
that is
pre-assembled to frame.
Figure 17
5113-5115 Wings
42728
1
2
1
2
1
2
4
3
Figure 18
Light Brackets
42644
2
1
1
2
3
4