Intraport enterprise-8 switch settings, Ntra, Nterprise – Compatible Systems IntraPort A00-1869 User Manual
Page 37: Witch, Ettings
Chapter 8 - LED Patterns and Test Switch Settings
31
IntraPort Enterprise-8 Switch Settings
The switch for Ethernet 0:0 controls the entire device. For example, if you set the switch for
Ethernet 0:0 to “3” and download new software to the device, the other interfaces will auto-
matically receive the software update from Ethernet 0:0 via the backplane. In general, the only
time you should use an individual RIOP card’s switch is when the card is unable to communi-
cate with the backplane for some reason.
M Caution: Settings marked with an asterisk may erase your Flash ROM. Please do not use
these settings without first contacting Compatible Systems’ Technical Support.
0
Normal Operation
1
Unused*
2
Unused*
3
Run Boot ROM Downloader
4
Unused*
5
Erase Flash ROM (OS and Configuration)
6
Erase Flash ROM (Configuration Only)
7
Unused*
8
Unused*
9
Allow letmein password for 5 minutes after powerup