Amico Artwall User Manual
Page 2
Note
Before Installation
ArtWall installation should conform to local building codes
The installation instructions provided are for the Amico standard products. Slight modifications
to the installations may be required. The product shipped to the job site may not be exactly as
shown on the installation drawings.
Review a copy of the final approved shop drawing(s) and/or submittal package. These docu-
ments will include technical information specific to the installation, such as:
- equipment types & quantities
- room numbers and location
- shop drawings of each unit type
- wiring diagrams and rough-in locations
Locate the headwall unit from the shipping boxes.
The contents of each shipping box are listed on the shipping document(s).
Ensure wall is framed and roughed in as per applicable building standards to accept art wall
back box. Allow 1/8” space on each side to allow for adjustment. Back box sizes are as follows:
3-gas box - 30 1/8 w x 21 1/8 h
5-gas box - 42 5/8 w x 21 1/8 h
1.
2.
3.
2
Amico Architectural
Typical example of 3-gas box with 3 gases
note: vertical studs face each other
top view