Amico Freedom Series Surface Mounted - Manual (Page 2)

Note
The installation instructions provided are for the Amico standard products. Slight modifications
to the installations may be required. The product shipped to the job site may not be exactly as
shown on the installation drawings.
Panel wall installation should conform to local building codes.
Figure 1
2 Amico Architectural
Before Installation
1. Review a copy of the final approved shop drawing(s) and/or submittal package. These docu-
ments will provide you with technical information specific to your installation, such as:
• equipment types and quantities
• room numbers and location
• shop drawings of each unit type
• wiring diagrams and rough-in locations
2. Locate the panel wall unit from the shipping boxes that you wish to install. The contents of each
shipping box are listed on the shipping document(s). Product is shipped in multiple sections,
please see picture below for references. (Figure 1)