Amico Regal Series Recessed Vertical Flatwall User Manual
Page 3
Installation
Note
Secure flatwall to building structure using hardware (by others) compliant to applicable
building codes. Ensure mounting location corresponds to on-site location of rough-ins.
Fastening of studs to tracks by others.
Make all electrical and piping connections. Med gas piping is terminated as per shop drawings;
electrical services are terminated at boxes attached to upper framing in flatwall structure.
Install drywall. See following section for instructions. Note that the unit is shipped with a gap
allowed between the flatwall front lip and stud face; this is to allow clearance for drywall installa-
tion.
Remove all zip ties where applicable
1.
2.
3.
www.amico.com
2
finished ceiling
line
medical gas piping
termination
electrical box
termination, divided
for each power (see
submittal drawings)