Amico British Standard Outlet Slim - Manual (Page 7)

www.amico.com 7
Regular inspection and maintenance of the Outlets will prolong its life and reduce the possibility of sudden, inconvenient
component failures. The use of damage probes or faulty equipment may require further maintenance.
Outlets should be subjected to regular inspection and testing as follows:
Monthly;
a. Visually inspect the Outlet for signs of damage.
b. Check to see if the Front Latch Assembly (2nd Fix) operates smoothly with the gas specific probe.
c. If there is any disagreement with the operation of the Front Latch Assembly (2nd Fix), remove the unit for closer
inspection/repair/replacement if necessary.
Annually;
a. Remove Trim Plate and clean debris from the mounting box.
b. Remove Front Latch Assembly (2nd fix) and inspect the barrel for any damage.
c. Inspect the Rough-in Assembly (1st fix) for any damage. If damage or leaking replace components.
d. Test Front Latch Assembly (2nd fix) for correct operation (connection and disconnection of the probe) using a
blank probe.
Preventative Maintenance