Aphex USB 500 Rack - Manual (Page 13)

Owner’s Manual
13
Additional Windows 7 notes:
The UI Theme must be sent to Windows Basic for best performance.
Right-click on the desktop and select “Personalize” to change this.
USB CONNECTION
The USB 500 Rack has a single USB 2.0 port on the rear panel. Once
the software installation is complete, simply connect the USB 500
Rack to your computer using the USB cable provided. Note that USB
500 Rack is a USB 2.0 device, and thus the USB connection requires
a USB 2.0 compatible port on your computer. It will not operate cor-
rectly with USB 1.0/1.1 ports. You MUST connect the USB 500 Rack
directly to your computer and NOT to a USB hub.
AUDIO SETUP IN YOUR DAW
After installing the drivers and connecting the hardware, you can start
using the USB 500 Rack with the DAW of your choice.
Once the USB 500 Rack is set as the preferred Audio Device in your
DAW, the following inputs will be available:
INPUTS
500 Rack Slot 1
500 Rack Slot 2
500 Rack Slot 3
500 Rack Slot 4
500 Rack S/PDIF 1
500 Rack S/PDIF 1
OUTPUTS
500 Rack Analog L
500 Rack Analog R
500 Rack Headphone L
500 Rack Headphone R
500 Rack Slot 1
500 Rack Slot 2
500 Rack Slot 3
500 Rack Slot 4