Aphex IN2 - Manual (Page 2)

On Track 1, click the (R) Record button, which will turn red.
On Track 1, click the (I) Input button, which will turn orange.
You should now see signal on the input meters and hear yourself in the IN2
headphones when you turn up the headphone level.
Cockos Reaper
Select Options-Preferences. Then select Audio-Device.
Set Audio System to ASIO.
For ASIO Driver select Aphex ASIO.
Click the check box to Enable Inputs.
Set First to 1: Aphex IN2 Analog 1.
Set Last to 2: Aphex IN2 S/PDIF 2.
Output Range: First should be 1: IN2 Analog 1, Last should be 2: IN2 S/PDIF 2.
Set ASIO Thread Priority to Highest.
Click OK.
Go to File- New project.
Go to Track-Insert New Track.
The new track will appear in the edit window AND the mixer window below.
Below the fader in the edit window for the new track is a dropdown list that allows
you to select a mono or stereo input for the track. It should default to IN2 Analog
1. If not, you can select it.
Below in the mixer window is the Master Fader. Click on the I/O button just above
the fader. IN2 Analog 1 and 2 should come up as the default output. If not, you
can delete what has come up as default and select IN2 Analog 1 and 2.
Exit the Outputs for Master Track screen.
Click on the Speaker icon of Track 1 in the mixer section to monitor the
recording.
Click the red circle (Track Arm) on Track 1.
You should now see signal on the input and output meters and hear yourself in
the IN2 headphones when you turn up the headphone level.