Aphex IN2 - Manual (Page 6)

IN 2
6
VOLUME
Turn this knob clockwise to boost the output level of analog outputs
1&2 as needed.
MONO
Pressing this
button will
sum stereo
output signal
of analog
outputs 1&2
to mono. This
is useful for
checking your
mix balance.
DIM
Pressing this
button lowers
the output
level of analog outputs 1&2 by 20dB. Use this when you want to have
a quick conversation in the room without losing your monitor level or
stopping playback.
3.0 Rear Panel Features
XLR INPUTS
Plug your microphones in here. If you wish to connect a “line level”
signal, use the XLR inputs and engage the –20dB pad on the top
panel.
CAUTION: Some dynamic and ribbon mics will be damaged by
phantom power. Please consult your mic’s manual before connect-
ing it to the IN2. Always turn OFF the 48V phantom power when
connecting and disconnecting your microphone.