Apricorn Aegis Secure Key - USB 2.0 Flash Drive - Manual (Page 4)

Apricorn Aegis Secure Key
2. Unlocking the Aegis Secure Key
1. Press the Key button
2. Within 10 seconds enter the User PIN
(Factory default PIN: 1-1-2-2-3-3-4-4)
3. Press the Key button will blink for a correct PIN entry
will blink for an incorrect PIN entry
4. Connect the Aegis Secure Key to a
USB port within 30 seconds will be on
will blink together
will be on or blink for activity
5. To lock the Aegis Secure Key, Unplug
it form the USB port.
The Aegis Secure Key is shipped with a default user PIN of 1-1-2-2-3-3-4-4.
We recommend that you change the user PIN immediately for security
reasons. Follow the directions under the heading “ Changing your PIN code.
3. Changing your PIN code
1. Press the Key button
2. Within 10 seconds enter the User PIN
and press the Key button (Factory default PIN: 1-1-2-2-3-3-4-4)
3. Press and hold the Key button
for 3 seconds
4. Enter a new PIN number
(The number must be 7 - 15 digits)
5.
to store the new PIN
6. Re-enter the new PIN number
7. Press the Key button
to confirm the new PIN
will blink together
will be on
Press the Key button
will blink together
will blink if the new PIN is accepted and
the Key is unlocked & ready to use
will blink alternately if the new
PIN was not accepted
Note: If a mistake is made when changing the PIN, or the process was not
complete, the KEY will retain the original PIN
A user PIN (Personal Identification Number) can be changed to almost any number
that is desired. To create your new PIN be sure to follow the instructions below
1. The new PIN is 7 to 15 digits long.
2. The new PIN can not contain all repeating numbers (3-3-3-3-3-3-3)
3. The new PIN can not have sequential numbers (1-2-3-4-5-6-7) or (7-6-5-4-3-2-1)
Instructions LED Activity
Instructions LED Activity
Page 3