Installation using the remote handset – Cambridge Audio azur 540V User Manual

Page 6

Advertising
background image

6 azur DVD receiver

Please take a moment to read these notes before installing your Azur
DVD receiver, they will enable you to get the best performance and
prolong the life of your unit.

This unit must be installed on a sturdy, level surface.

The unit requires ventilation. Do not situate it on a rug or other soft
surface and do not obstruct any air inlets or outlet grilles.

Do not place in a sealed area such as a bookcase or in a cabinet. Any
space open at the back (such as a dedicated equipment rack) is fine.

Never allow this unit to come into contact with water or other liquids and
ensure that small objects do not fall through any ventilation grille. In
either event, switch it off immediately, disconnect it from the mains
supply and contact your dealer for advice.

Do not route the power cable so that it can be walked upon or damaged
by other items near it.

Like all audiophile electronic components, this unit will subtly improve
with some initial running in.

If you do not intend to use this unit for a long period, switch it off and
unplug it from the mains socket.

To clean the unit, wipe its case with a moist, lint-free cloth. Do not use
any cleaning fluids containing alcohol, ammonia or abrasives. Do not
spray an aerosol at or near your DVD receiver.

This product is not user serviceable. If you have checked the
troubleshooting guide at the back of the manual with no improvement,
do not attempt to repair, disassemble or reconstruct the unit. A serious
electric shock could result if this precautionary measure is ignored. In
the event of a problem or failure, please contact your dealer.

INSTALLATION

USING THE REMOTE HANDSET

When you have unpacked your remote handset, insert the supplied AAA
batteries to activate it. The remote can control all of the standard
playback options but is also important in setting up your DVD player as
many of the menus are most easily accessed from the remote.

To navigate menus, the four cursor buttons marked with arrows will
move you around the menus and the SELECT button in the middle of
them will access the item highlighted at the time. This applies to both
the setup menus on the 540V and the menus on DVD discs themselves.

Note - TThe 5

540V rremote ccontrol ffeatures sseparate

Skip aand S

Search bbuttons

The

S

Skip

bbuttons

w

will

sskip

bbetween

chapters/tracks oon aa D

DVD/CD w

whilst tthe S

Search

buttons sshould bbe uused tto ssearch w

within aa

chapter/track.

Advertising